tag:blogger.com,1999:blog-356451586506207101.post6272901368006470724..comments2014-01-02T08:22:59.748+10:00Comments on Neutron ARM Thyself: Hobby King MultiWii 328P Flight Controller w / FTDI & DSM2Wockethttp://www.blogger.com/profile/13850007881556963961noreply@blogger.comBlogger4125tag:blogger.com,1999:blog-356451586506207101.post-35305573017244593192014-01-02T08:22:59.748+10:002014-01-02T08:22:59.748+10:00This is a very comprehensive Blog well done. Howev...This is a very comprehensive Blog well done. However i am having problems my self. i am yet to find anyone to ask a few questions of, my hope is that you may have an idea of the best direction to take. Its my first scratch build X-Quad I have done pritty much what you have suggested here yet i am having problems with Yaw control. Pitch and roll seems to work (hard to tell in flight when all the copter want to do is spin, Anti clockwise i will add). If i hold the copter spin up the props and then tilt there is resistance so this tells me that the Gyro is working, If i rotate it the opposite prop to the rotation will spin up while the rest slow down. The PID settings are at 4, 0.0045, 15 for pitch and roll and 8, 0.000, 0 for Yaw. Im hoping to get some fresh ideas as i have run out and am looking at throwing it in the bin. The board is i believe to be the same as the second one you pictured.Anonymoushttps://www.blogger.com/profile/14531751705186263653noreply@blogger.comtag:blogger.com,1999:blog-356451586506207101.post-44777685296359247622013-10-13T17:50:02.480+10:002013-10-13T17:50:02.480+10:00Hi Rod, thnx for the reply. I am waiting my GLB pa...Hi Rod, thnx for the reply. I am waiting my GLB package with the FTDI programmer and then I will just cross my fingers.<br />My quad:<br />http://www.rcgroups.com/forums/showthread.php?t=1970923<br />Another thread with info:<br />http://www.rcgroups.com/forums/showthread.php?t=1757643<br />I am having a blast FPV flying with that cheap- basic quad.<br />I just love the versatility! <br /><br />SakisAnonymoushttps://www.blogger.com/profile/01758820445825909911noreply@blogger.comtag:blogger.com,1999:blog-356451586506207101.post-82942629180118241242013-10-13T09:43:15.676+10:002013-10-13T09:43:15.676+10:00Hi Sakis
There is a way but it was dependent on if...Hi Sakis<br />There is a way but it was dependent on if the protection fuse was set. As it turns out I did not need to. After performing Tungsten's (and others) mods I did not need it. I have versions 2.1 and 2.2 of MultiWii conf that now use D7, D9 and D12.<br />RodWockethttps://www.blogger.com/profile/13850007881556963961noreply@blogger.comtag:blogger.com,1999:blog-356451586506207101.post-75708179446107283232013-10-13T04:54:13.094+10:002013-10-13T04:54:13.094+10:00Great write up!
So did you find a way to backup th...Great write up!<br />So did you find a way to backup the already installed code in your board?<br /><br />SakisAnonymoushttps://www.blogger.com/profile/01758820445825909911noreply@blogger.com